| Since its introduction in 2007, the all-mountain Diamondback Mission has become the hands-down favorite of some of the most discriminating riders in the world. The Mission put the "all" in "all-mountain" and the "mountain" back in "mountain bike," leaving riders to wonder where they couldn't ride it. Diamondback continued to refine the Mission design in 2009 with the release of the Mission 2, which is built up using the same revolutionary 6-inch all-mountain frame found on its two siblings (the Mission 1 and 3), but offers several upgrades over the Mission 1. The Mission 2 includes such improvements as a Fox Float R 150mm Air fork with a 15mm thru axle, SRAM X.7 trigger shifters, and Hayes Stroker Trail hydraulic disc brakes. Other features include a Knuckle Box rear suspension, a Truvativ Fire-X crankset, Sun Equalizer double-wall disc rims, WTB Prowler MX/Stout folding tires, and a WTB Pure V Sport saddle. Knuckle Box Suspension System All the scientific reasoning and engineering jargon in the world won't help you understand how the Knuckle Box suspension system performs. To truly appreciate how the system works, you really need to ride one. However, all bikes with Knuckle Box systems do share some common traits. The first is an optimized wheel rate, the parameter that defines what the suspension will feel like when riding. The Knuckle Box is shaped in such a way that the wheel rate starts off linear and finishes slightly progressive. This results in great small bump compliance, more perceived travel, and great bottom-out protection. Riders will also enjoy an optimized axle path--the parameter that defines your pedal feedback. By manipulating the pivot locations of the Knuckle Box system, Diamondback has come up with a design that produces very low chain-growth values, so you barely feel any pedal feedback at all. Finally, the Knuckle Box offers a low center of gravity. With most of the mass concentrated low in the frame, the bike feels lighter and more balanced, and maneuvers better than other mountain bikes. 
The Mission 2's Knuckle Box suspension system helps the bike feel light, smooth, and maneuverable. | Specifications: - Sizes: Small (15.5 inches), medium (17 inches), large (19 inches), and extra-large (21 inches)
- Frame: Mission all-mountain 6-inch aluminum with hooded hydroformed top tube, butted/formed down tube/seatstays, under-arch seatstay bridge, Knuckle Box technology, ISCG, Hammerschmidt readyÿ
- Fork: Fox Float R Air, 150mm travel, open bath, with exterior rebound adjust , butted alloy steerer, 32mm Easton aluminum stanchions, magnesium lowers, with 15mm thru axleÿ
- Rear shock: Fox Float RP2 200 x 51mm Air with rebound adjust 2
- Cranks: Truvativ Fire X Giga X Pipe with AL-7075 aluminum outer ring, 22/32/44t ÿ
- Bottom bracket: Truvativ Giga X Pipe outboard sealed cartridge
- Front derailleur: Shimano Deore dual pull, top swing
- Rear derailleur: SRAM X-9
- Shifter: SRAM X-7 9-speed trigger
- Brake levers: Hayes Stroker Trail with reach adjust
- Brakes: Hayes Stroker Trail hydraulic V7" (front), V6" (rear) rotors
- Gear: SRAM PG-950 9-speed cassette (11-34t)
- Rims: 32H Sun Equalizer with eyelets
- Tires: WTB Prowler MX 2.3 (front), Stout 2.3 (rear), folding
- Pedals: DB Sound alloy with molded traction pins
- Handlebar: Easton EA50 MidRise, 31.8mm
- Stem: Easton EA50, 31.8mm
- Seatpost: Easton EA50 double-bolt clamp, 30.9mm
- Seat: WTB Pure V Sport
- Headset: Zero Stack 1-1/8 inch ACB with deep alloy cups
- Chain: Zero Stack 1-1/8 inch ACB with deep alloy cups
- Hubset: 32H Neau Naim alloy sealed bearing disc with 15mm thru axle (front), 32H alloy disc cassette with CNC disc mountÿ(rear)
- Spokes: Black 14g stainless steel
- Grips: DB Brics 130mm, D2 Kraton
- Extras: DB key chain, Chainstay protector, water bottle mounts, clear coat, owner's manual
| Mission 2 Bike Geometry | | Size | Small | Medium | Large | Extra-large | | Seat tube length | 15.5 inches | 17 inches | 19 inches | 21 inches | | Standover height | 29 inches | 29.5 inches | 29.5 inches | 30 inches | | Top tube length | 22 inches | 23 inches | 24 inches | 25 inches | | Head tube length | 120mm | 130mm | 145mm | 145mm | | Head angle | 68 degrees | 68 degrees | 68 degrees | 68 degrees | | Seat angle | 72 degrees | 72 degrees | 72 degrees | 72 degrees | | Wheel base | 1,087mm | 1,109mm | 1,140mm | 1,172mm | | Chainstay length | 440mm | 440mm | 440mm | 440mm | | Fork offset | 42mm | 42mm | 42mm | 42mm | | BB height | 348mm | 348mm | 348mm | 348mm | | Stem length | 90mm | 90mm | 100mm | 100mm | | Handlebar width | 680mm | 680mm | 680mm | 680mm | | Crank length | 170mm | 175mm | 175mm | 175mm | | Seat post length | 300mm | 300mm | 300mm | 300mm |
|
0 Comments until now
Add your Comment!